Family of Products
Brake & Fuel Lines Proportioning Valves Rear Drum Brakes Rubber Brake Hoses Brake Clips & Clamps Straight Length Tubing OEM Gas Tanks Detail Tags	Parking Brake Cables Disc Brake Conversion Inline tube Exhaust Stainless Braided Hoses Street Rod Plumbing Plumbing Tools Fuel Sending Untis Assembly Manuals

BLK240

1962-1964 A, B, C-body Mopar Distribution Block - Plymouth Polara / Dart / Coronet / Fury / Belvedere

Tee Block - Brass 4 Port Valve  Front Drum - Rear Drum, Each.

Brass
$24.00

Valve Notes:

For use on 1962-64 factory drum cars.

This is the distribution block that is mounted below the single master cylinder which feeds fluid to all four wheels. 1962-64 cars have a 1/4" master cylinder line while the rest of the lines are 3/16". This is an exact reproduction down to every detail. It is the correct size shape and thickness, made of brass with a phosphate bracket. These blocks are often missing, thrown away, or stripped. 

1962-66 cars all had a single master cylinder with drum brakes. There was no proportional valve and no disc brakes available in these years. The tee block that mounted to the frame served as the distribution block. When converting to disc brakes, the system will need BLK241 conversion valve. This aftermarket valve mounts on the frame the same as 62-66 cars on a bracket.

1967-70 cars all had a dual master cylinder and also 1967 was the first year for disc brakes. If the car had drum brakes, there was a distribution block with a built-in brake warning switch. If the car had factory disc brakes, it used the drum dist. block in conjunction with a disc brake hold off valve, which made the disc cars a 2 part valve. For disc brake conversions, replacement aftermarket 1 piece valves are available, see listing.

---